Before you change the mix, measure what your room and speakers are doing at your listening position.
Start with Edge360. Put measurements behind your next decision.
Measure. Calibrate. Get back to mixing.
Pair Edge360 with Antelope Room Correction.
Import your microphone’s individual calibration file, measure your room and speakers – Antelope Room Correction does the rest, running with no perceptible latency on your interface’s FPGA chip.
Less uncertainty about your room. More focus on your mix.
Every Edge360 is individually measured and supplied with a calibration file unique to its serial number – not a generic file for the entire model.
Its linear 20 Hz–20 kHz response lets your room speak for itself – without the presence boosts or low-end shaping of vocal and instrument mics.
Import your calibration file into Antelope Room Correction to compensate for your mic’s own frequency-response deviations – and get a reliable measurement you can trust and act on.
Less second-guessing your setup. More confidence in your next move.
Acoustic specs
16 mm electret condenser capsule optimized for measurement
True omnidirectional polar pattern with consistent off-axis behavior.
Linear 20 Hz – 20 kHz frequency response covering the full audible band.
Sensitivity of -40 dB (0 dB = 1 V/Pa @ 1 kHz) into standard preamps.
Maximum SPL of 124 dB for high-level sweeps and live tuning.
70 dB signal-to-noise ratio for a clear noise floor in quiet rooms.